Aussie Koala 7900 Series Assembly And Use Manual
  1. Manuals
  2. Brands
  3. Aussie Manuals
  4. Grill
  5. Koala 7900 Series
  6. Assembly and use manual

Aussie Koala 7900 Series Assembly And Use Manual

Lp gas grill
Hide thumbs Also See for Koala 7900 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Aussie
LP Gas Grill
Assembly and Use Manual
FOR OUTDOOR HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.
For Customer Service, call 1-800-251-7558 or visit our web site at www.meco.net
• Failure to follow these instructions could result in fire or explosion which could cause death,
serious personal injury, or property damage.
• Read and follow instructions carefully before assembly or use.
• Do not use this product for any other purpose than which it is intended.
• These instructions must be kept with the user. SAVE THESE INSTRUCTIONS.
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
®
b b y y M M e e c c o o
M M O O D D E E L L 7 7 9 9 0 0 0 0 S S e e r r i i e e s s L L i i q q u u i i d d P P r r o o p p a a n n e e G G a a s s G G r r i i l l l l
®
TM
Koala
1. Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance.
2. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Koala 7900 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Aussie Koala 7900 Series

Summary of Contents for Aussie Koala 7900 Series

  • Page 1 Aussie ® b b y y M M e e c c o o ® LP Gas Grill Assembly and Use Manual Koala M M O O D D E E L L 7 7 9 9 0 0 0 0 S S e e r r i i e e s s L L i i q q u u i i d d P P r r o o p p a a n n e e G G a a s s G G r r i i l l l l FOR OUTDOOR HOUSEHOLD USE ONLY.

  • Page 2: Table Of Contents

    — NOTICE — MECO CORPORATION STRIVES TO BE A QUALITY SUPPLIER OF CONSUMER PRODUCTS. IF WE OMITTED ANY PARTS NEEDED FOR ASSEMBLY, OR YOU NEED TROUBLESHOOTING INFORMATION, PLEASE CONTACT US USING OUR TOLL FREE NUMBER. THANK YOU FOR PURCHASING A MECO CORPORATION PRODUCT. CONSUMER SERVICE DEPARTMENT 1-(800)-251-7558 8 am - 6 pm E.S.T Mon.

  • Page 3: Parts Illustrations

    PARTS ILLUSTRATIONS If you need replacement parts, refer to the Parts Illustrations and the Parts List to find the exact parts you need. If you have any questions which require help, contact Customer Service and be sure to mention the model number of your grill. (3) Cylinder Retainer Clip (1) Owner’s Manual...

  • Page 4: Parts List

    (36) Bolt, M6x75 2 pc (35) Side Burner Grid (37) Heat Shield (38) Handle Spacer (39) Hood Handle (40) Flame Diffuser (41) Cooking Grid (42) Warming Rack (44) Main Burner (43) Fabric Panel (46) Main Burner (45) LP Cylinder (47) Control Panel Electrode Heat Shield w/Manifold and...
  • Page 5 PARTS LIST (cont'd) Sidebrace, Right 03.6584.00 Sidebrace, Left 03.6585.00 Screw, ST 4.0 x 10 03.6583.00 Screw, M4 x 10 Black 03.6267.00 Wingnut, M4 Solid (Left Sidebrace) 03.6313.00 Crossbrace, Rear 03.6166.00 Screw, M6x70 03.4097.00 Right Side Table Black 03.6586.00 Left Side Table Black 03.6587.00 Screw, M6x15 03.6208.00...

  • Page 6: Step 1) Cart Assembly

    To reduce the risk of a cut injury: · Wear protective gloves when handling parts that have sharp edges. · Some assembly may require help from another person. Observe where noted. TOOLS: and/or STEP 1) Cart Assembly: Attach the Legs to the Bottom Shelf with (8) M5 X 35 SCREW M5 x 40 Bolts threaded into the Bottom 8 pcs...

  • Page 7: Step 2) Assemble Axle, Wheels & Wheel Covers

    STEP 2) Assemble Axle, Wheels & Wheel Covers: (9) with Item (11) installed (11) Nut, M8 (12) WHEEL COVER 2 PCS 2 PCS (10) WHEEL 2 PCS (9) AXLE (10) WHEEL (11) Nut, M8 WHEEL LEGS (12) WHEEL COVER Push Axle through holes in Wheel Legs. Place Wheels on both ends of Axle, then tighten with two M8 Nuts with wrench or pliers.

  • Page 8: Step 4) Install Grease Cup

    Align groove Step 4) Install Drip Cup: with vertical wire Insert Drip Cup into Drip Cup Holder ring until the cup flange is flush with the ring and the notch in the lip of the cup fits the vertical hanger wire. (17) Drip Cup Step 5) Assemble Sidebraces and Rear Crossbrace: ·...

  • Page 9: Step 6) Assemble Side Tables

    Step 6) Assemble Side Tables: Align bracket holes of Left and Right Side Tables with holes in Bowl Leg Brackets. Attach Side Tables with M6X15 Screws underneath. (26) Right Side Table (27) Left Side Table (28) Screw, M6x15 8 pcs FIG.

  • Page 10: Step 8) Assemble Side Burner & Electrode

    Step 8) Assemble Side Burner Electrode and Side Burner: · Feed Electrode wire through upper left hole from large center hole in Side Burner Reflector. (FIG. 8A) Allow electrode into to follow wire into hole and lie flat. (8B) (32) Side Burner Electrode 1 pc Electrode Wire Side Burner...

  • Page 11: Step 9) Attach Hood Handle & Shield

    · Align prongs of Side Burner Grid with holes in Side Table and lower grid into the holes. Side Table Assembly Finished (FIG. 8F) (35) Side Burner Grid FIG. 8F FIG. 8G Step 9) Attach Hood Handle and Shield: Open Hood. Insert M6 Bolts through Heat Shield, Hood, through large end of Handle Spacers and to the Handle.

  • Page 12: Step 10) Install Flame Diffuser

    Step 10) Install Flame Diffuser: Flame Diffuser mounting stud in Bowl. Place the Flame Diffuser over the Main Bowl Burner, onto the two mounting studs on each side of the Bowl. (FIG.10) (40) Flame Diffuser (40) Flame Diffuser FIG. 10 (41) Warming Rack 1 pc (41) Warming Rack...

  • Page 13: Connecting/Disconnecting The Gas

    CONNECTING/DISCONNECTING THE GAS USING GAS · Never fill the LP gas cylinder more than 80% of cylinder volume. (20 lb. maximum) Do not ask the propane supplier to over-fill the cylinder. · If you obtain LP gas through a cylinder exchange CARBON MONOXIDE HAZARD dealer, make sure you get a safe and adequate O.P.D.

  • Page 14: Disconnecting Lp Gas Cylinder

    3) Lift and swing LP Cylinder Retainer Clip to outside of grill. Set LP cylinder in the large hole inside the Bottom Shelf. Rotate the LP Make sure hose is cylinder toward the front of grill so regulator routed outside and hose may connect.

  • Page 15: C) Selecting A Location

    6) Check for leaks by brushing the soap solution SELECTING A LOCATION on all gas valves, hose connections and fittings. (shown by the heavy arrows in (FIG. 14A, 14B To reduce the risk of serious bodily injury or death: & 14C) Make sure you generously brush the ·...

  • Page 16: E) Lighting Using The Ignitor

    Control Knob in OFF position Side Burner fittings FIG.15A under Side Table FIG. 14C LIGHTING THE GRILL USING THE IGNITOR To reduce the risk of serious bodily injury or death: · Open Hood before lighting the grill to prevent an explosion from any gas accumulation.

  • Page 17: F) Manual Lighting The Grill

    MANUAL LIGHTING THE GRILL LIGHTING THE SIDE BURNER To reduce the risk of serious bodily injury or death: To reduce the risk of serious bodily injury or death: · If lighting attempts fail, or the burner goes out during · Open Hood before lighting the grill to prevent an operation, turn control knob “Off”...

  • Page 18: I) Manual Lighting The Side Burner

    MANUAL LIGHTING THE SIDE BURNER Cooking on the Grids: The burners heat up the Flame Diffusers under the Cooking Grids, which in turn heat the food on the grill. The natural food juices from cooking fall onto the hot Flame Diffusers below and vaporize. Rising smoke bastes To reduce the risk of serious bodily injury or death: the food, giving it that unique barbecued flavor.

  • Page 19: D) End Of Cooking Session

    3) Turn off the gas at the LP cylinder valve by turning the · Do not use the grill without the Drip Cup in place. handle clockwise until it stops. Empty excess grease to avoid a fire under the grill. 4) Wait until the grill is cool before closing the hood, cleaning ·...
  • Page 20 5) Use a pipe cleaner to clear insect nests from the inlet hole of main burner (FIG. 20C) and side burner ventilation hole. (FIG. 20D) Open up the main burner holes and the To reduce the risk of a fire beneath the grill: side burner holes with a small nail or wire.Normal wear ·...

  • Page 21: B) Storage

    STORAGE 1) Disconnect LP gas cylinder from grill and store outside, in a dry, well-ventilated area, away from any sources of heat or ignition. Re-cap LP cylinder valve with the Safety Cap. 2) Remove Burners and wrap with aluminum foil to prevent To reduce the risk of serious bodily injury or death: insects from entering the burner holes.
  • Page 22 TROUBLESHOOTING (Cont’d) Problem: Possible Cause: Solution: Burner will not light Make sure burner tube is over the gas nozzle. See How to Clean Burner is not connected to using a match the Burners page 20- Re-install after cleaning. Valve. Take LP gas cylinder to licensed LP gas supplier to be refilled. LP gas cylinder is empty Turn control knobs to “off”...

  • Page 23: Important Notice-Lp Cylinder With Opd

    IMPORTANT NOTICE This Gas Grill must be used with a LP Gas Cylinder equipped with an OPD (Overfill Prevention Device). This is a secondary device to prevent the overfill of your LP Gas cylinder. The proper methods for the filling of your LP Gas cylinder are by weight or volume, as described in NFPA 58.

  • Page 24: Limited Warranty

    MECO CORPORATION LIMITED WARRANTY This product is warranted to the original consumer purchaser against defects in material and workmanship under normal outdoor household use and correct assembly (if assembled by the consumer-purchaser). Burner and Cooking Grid are warranted for a period of one (1) year from the date of purchase.

Table of Contents