ENGLISH (Original instructions) SPECIFICATIONS Model LM2300 No load speed 8,000 min Height of cut 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm Width of cut 230 mm at work (with grass basket) 833 mm x 256 mm x 661 - 900 mm...
Page 3
13. Prevent unintentional starting. Ensure the switch 26. Follow instruction for lubricating and changing is in the off-position before connecting to power accessories. source and/or battery pack, picking up or carrying 27. Keep handles dry, clean and free from oil and the tool.
Page 4
13. Do not secure the Lock OFF Lever once it has been slid into lock OFF position. • An unforeseen movement may cause injury. 14. Only use the electric lawn mower for lawn mowing (do not use it for weed cutting). •...
Page 5
Blade Status Monitoring Window 1. Blade status monitoring window • The Monitoring Window on top of the main unit of the device enables user to check whether blade is moving or stationary. • The blade is rotating when a red & white pattern is spinning round or a pink color can be seen.
1. Over current 1. Hook relay 2. Waist hook 3. Holder • If the electric lawn mower is used while grass cuttings 1. A section and other dirt are blocking the inside of the main unit, 2. Holder the over current relay will operate, automatically stopping the device.
Page 7
WARNING: • Change the mowing angle (direction) to prevent the Before mowing, clear away sticks and stones from grass grain pattern from forming in just one direction. As the figure shows, changing the mowing angle mowing area. Furthermore, clear away any weeds (direction) each time the electric lawn mower is passed from mowing area in advance.
1. Grass basket 1. Bottom plate 2. Hook 2. Lock pin 3. Handle 3. Hole 1. Remove the grass basket and shorten the handle. 4. Use the hex wrench to loosen the hexagonal bolt. (See the section titled “Extending handle” for details.) 1.
OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.