Removing The Rear Seat (2 Door Models) - Jeep 2007 wrangler Owner's Manual

92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Removing the Rear Seat (2 Door Models)

WARNING!
• It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision people
riding in these areas are more likely to be seri-
ously injured or killed.
• Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.
• Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
• In a collision, you or others in your vehicle could
be injured if seats are not properly latched to their
floor attachments. Always be sure that the seats
are fully latched.
1. Remove the rear subwoofer (if equipped) mounting
screws (3) using a #T30 Torx head driver.
2. Unplug electrical connector from rear subwoofer (if
equipped).
3. Fold the rear seat forward following steps 1 through 3
under "Fold and Tumble Rear Seat" in this section.
I n f o r ma t i o n P r o v i d e d b y :
Subwoofer