Jeep 2007 wrangler Owner's Manual page 123

3. Install the door frames. Refer to "Door Frame" in this
section.
4. If the soft top has been removed, follow these steps to
reinstall the soft top. If the soft top is on the vehicle,
proceed to step #5.
a. If the pivot brackets have been removed, unzip the
sport bar covers and attach the pivot brackets to the
sports bar with the 4 screws that were removed using
a #T30 Torx head driver. Re-cover and re-zip sport bar
covers.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123
b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of the
bows facing upward.
I n f o r ma t i o n P r o v i d e d b y :
3