Troubleshooting Solutions - Aastra 6739i Installation Manual

Hide thumbs Also See for 6739i:
Table of Contents

Advertisement

Troubleshooting Solutions

Why is the light not coming on with a new Voice Mail Message?
Your phone system or service provider must provide "Visual" Message Waiting service for this function to work. Check
with your system administrator for more information.
Why is my handset not working?
Check to ensure that the handset cord is fully connected to both the phone and handset. See the section
Handset, Headset, or DHSG Headset"
Why is my speakerphone not working?
If you press
and the speaker light flashes and you do not hear dial tone, the Set Audio option has been used to set
up the phone for headset use; press
headset or handset. If the light stays on steady and you hear dial tone, you can alternate between the speakerphone and
the headset by pressing
feature.
Why is my display blank?
Ensure that power is being provided to your phone. If your Network does not provide Inline power over Ethernet, you can
obtain an additional accessory, the a PoE inline power injector, to provide power over Ethernet locally to your phone.
See the section
"Connecting to the Network and to Power"
Can I turn the backlight for the screen on and off?
Yes. You can use the IP phone UI to turn ON and OFF the backlight for the screen.
1.
Press the
key.
2.
Select Display>Backlight.
3.
Press the Change key to turn the backlight on and off.
4.
Press Save to save the change.
Why does the telephone wobble?
Make sure the cords are routed properly through the back of the phone, as indicated in the section,
set, Headset, or DHSG Headset"
legs can be oriented in two different ways and in two different positions to offer four different phone viewing angles,
check that both legs are oriented in the same direction and in the same position on either side of the phone.
41-001310-06 Rev 02 – 04.2012
on
page 10
for information.
a second time. If the light goes out, the phone is set up to be used only with a
. See the section,
"Set Audio"
on
page
10. Check that the leg stands have been properly snapped into place. Since the
on
page 17
for instructions on how to change the Set Audio
on
page 8
for details.
Troubleshooting Solutions
"Connecting a
"Connecting a Hand-
23

Advertisement

Table of Contents
loading

Table of Contents