Aastra 6739i Installation Manual page 14

Installation and Setup
Connecting a Handset, Headset, or DHSG Headset
Handset
To connect the handset to the phone:
1. On the back of the phone base, locate the handset port marked
port until it clicks into place.
2. Route the handset cord through the channel as shown in the illustration on
3. Attach the handset to the other end of the handset cord.
Headset (Optional)
To connect a headset to the phone:
1. On the back of the phone base, locate the headset port marked
clicks into place.
2. Route the headset cord through the channel as shown in the above illustration on
DHSG Headset (Optional)
You can attach an optional DHSG headset to the 6739i IP Phone if required.
To connect a DHSG headset to the phone:
1. On the back of the phone base, locate the DHSG port marked AUX.
2. Attach your 3rd party DHSG headset cable to Aastra's DHSG jack.
10
. Insert one end of handset cord into the
page 11.
. Insert the headset cord into the port until it
page 11.
41-001310-06 Rev 02 – 04.2012