Troubleshooting Solutions - Aastra 6751i RP Installation Manual

Troubleshooting Solutions

Why is my handset not working?
Check to ensure that the handset cord is fully connected to both the phone
and handset. See the section
information.
Why is my speakerphone not working?
If the speaker light goes out, the phone is set up to be used only with a
handset. If the light stays on steady and you hear dial tone, you can
alternate between the speakerphone and the handset by pressing
Why is my display blank?
Ensure that power is being provided to your phone. If your Network does
not provide Inline power over Ethernet, you can obtain an additional
accessory, the a PoE inline power injector, to provide power over
Ethernet locally to your phone. See the section
Network and to Power"
Why can I only see 1 option when the installer or user guide says
there are more?
The telephone screen will only show 1option at a time. To see more, press
the down arrow button
Why does the telephone wobble?
Make sure the cords are routed properly through the back of the phone, as
indicated in the section,
the leg stands have been properly snapped into place. Since the legs can be
oriented in two different ways and in two different positions to offer four
different phone viewing angles, check that both legs are oriented in the
same direction and in the same position on either side of the phone.
22
"Connecting a Handset"
on page 9 for details.
.
"Connecting a Handset"
Model 6751i RP Phone Installation Guide
on page 11
"Connecting to the
on page 11. Check that
for
.
Speaker Speaker