Fuel Storage - Wacker Neuson BTS Series Operator's Manual

Putting into operation
7.4

Fuel storage

T00962GB
The 2-cycle engine oil must comply with API TC, JASO FC or ISO L-
EGD specifications.
NOTE: For preparing the fuel-oil mixture first mix the entire oil quantity
with half of the fuel required, then add the remaining fuel. Shake the
finished mixture thoroughly before pouring it into the saw's tank.
ATTENTION: Open the tank cap carefully, as pressure might have
built up inside!
It is not wise to add more engine oil than specified to ensure safe
operation. This will only result in a higher production of
combustion residues which will pollute the environment and clog
the exhaust channel in the cylinder as well as the muffler. In
addition, fuel consumption will rise and performance will
decrease.
Fuels have only a limited shelf-life. Buy only as much as you will use
in 4 weeks.
Only store fuel in approved and marked containers.
37
AVOID SKIN AND EYE CONTACT
Mineral oil products degrease your skin. If your skin comes in contact
with these substances repeatedly and for an extended period of time,
it will dry out. Various skin diseases may result. In addition, allergic
reactions are known to occur.
Eyes can be irritated by contact with oil. If oil comes into your eyes,
immediately wash them with clear water.
If your eyes are still irritated, see a doctor immediately!
40