Fuels - Wacker Neuson BTS Series Operator's Manual

7.3

Fuels

T00962GB
ATTENTION:
The cut-off saw uses mineral-oil products (gasoline and oil).
Be especially careful when handling gasoline.
Do not smoke. Do not allow gasoline to come near flames, sparks
or fire (explosion hazard).
1000 cm
5000 cm
10000 cm
36
Fuel mixture
The cut-off saw is powered by a high-performance two-cycle engine. It
runs on a mixture of gasoline and two-cycle engine oil.
The engine is designed for unleaded regular gasoline with a min.
octane value of 91 ROZ. In case no such fuel is available, you can use
fuel with a higher octane value. This will not affect the engine.
In order to obtain an optimum engine output and to protect your
health and the environment use unleaded fuel only.
Putting into operation
Gasoline
+
3
(1 liter)
3
(5 liter)
3
(10 liter)
Us-gal.1,0
Us-gal. 2,5
Us-gal. 5,0
The correct mixture ratio:
50:1 50 parts gasoline to 1 part oil.
39
50:1
3
20 cm
3
100 cm
3
200 cm
2,5 fl.oz.
6,4 fl.oz.
12,8 fl.oz.