Speaker Setting; Switching Display; Dimmer Control - Kenwood KDC-MP4533 Instruction Manual

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Speaker type Display
OFF "SP OFF"
For 5 & 4 in. speaker "SP 5/4"
For 6 & 6x9 in. speaker "SP 6*9/6"
For the OEM speaker "SP OEM"
4
Exit Speaker Setting mode
Press the [VOL] knob.

Switching Display

Changing the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob towards [4] or
[¢].
In Tuner source
Information
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Play time & Track number
Clock
In Audio file source
In Standby/ Auxiliary input source
3

Dimmer Control

You can lower the brightness of the display by
using the dimmer function.
Press the [ATT] button for at least 1 second.
Display
"FREQ"
"CLOCK"
Display
"D-TITLE"*
"T-TITLE"*
"P-TIME"
"CLOCK"
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & Track number
Clock
Information
Auxiliary input name
Clock
Exit Switching Display mode
Press the Control knob.
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• Album name cannot be displayed in WMA file.
Each time you press the button for 1 second, the
Dimmer contol turns ON or OFF.
When the Dimmer control is ON, "DIM ON" is
displayed.
Display
"TITLE"*
"ALBUM"*
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"SRC NAME"
"CLOCK"
9
|
English