Toro GrandStand 74534TE Operator's Manual page 51

1
1. Left motion control lever
2. Right motion control lever
2. Ensure the right motion control lever moves easily
into the neutral lock position.
Note: Turn the cable adjustment clockwise to move
the motion control handle forward. Turn the cable
adjustment counter-clockwise to move the motion
control handle rearward.
3. Rotate the cable adjustment on right side when
adjustment is needed. Adjust the cable adjustment in
quarter-turn increments.
4. After the right motion control lever moves easily
into the neutral lock position, adjust the left motion
control lever to align with the right motion control
lever.
5. Check for proper tracking. Refer to Adjusting the
Tracking in the Maintenance Section.
2
G012706
Figure 72
3. Neutral locked position
4. Align the control levers
front to back
3
4
1. Left cable adjustment
2. Right cable adjustment
51
Figure 73
3. Platform down