Driving Forward Or Backward - Toro GrandStand 74534TE Operator's Manual

Figure 21
1. Platform up
2. Platform down

Driving Forward or Backward

The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the fast position for best
performance. Always operate in the full throttle
position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
Slow the machine down before making sharp turns.
Driving Forward
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. To go forward, move the speed control lever to the
desired speed.
3. Move the right side motion control lever to the
center, un-locked position.
3. Pull the knob out to release
the platform
3
2
1. Front reference bar
2. Left control lever
3. Rear reference bar
4. Slowly push the motion control levers forward
(Figure 23).
Note: The engine will kill if a motion control lever
is moved with the parking brake engaged.
The farther you move the motion control levers in
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers back to the
neutral position.
23
2
1
4
5
4
g012570
Figure 22
4. Right control lever
5. Right control lever in the
neutral lock position