Changing The Engine Oil - Toro GrandStand 74534TE Operator's Manual

1
3
6
8

Changing the Engine Oil

Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2
5
4
7
10
9
Figure 44
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 45).
1
3
4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the Full mark (Figure 46).
G008792
36
2
4
Figure 45
g012596