Right Side Graphic Display Switching
Switching the Right side graphic Display.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2
Enter display control mode
Press the [3] ("DISP") button.
3
Select the Right side graphic display
Press the [3] ("SA") button.
Each time the button is pressed the right side graphic display
switches as shown below.
Right side graphic display
Demonstration
Movie 1
Movie 2
Movie 3
Downloaded movie
Spectrum analyzer 1
Spectrum analyzer 2
Spectrum analyzer 3
Spectrum analyzer 4
Spectrum analyzer 5
Wallpaper
4
Exit display control mode
Press the [RTN] button.
Function of the KDC-X969
— 17 —
• The setting of this function is available while "Display Type B" or
"Display Type C" is selected for the Display mode.
• A downloaded movie can be selected when it has been
downloaded into this unit.
Refer to <Picture downloading> (page 46).
• Wallpapers can be changed.
This unit comes with 3 types of wallpaper registered.
A downloaded wallpaper is added to the place after the last
original wallpaper of this unit.
Refer to <Wallpaper selecting> (page 18).