Table of Contents
Advertisement
General features
System Q
You can recall the best sound setting preset for different types of
music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
SRS WOW
Flat
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the <Audio control> (page 12).
• Each setting value is changed with the <Speaker setting> (page
12).
First, select the speaker type with the Speaker setting.
• When <Dual Zone System> (page 26) is set to ON, the setting of
SRS WOW is disabled.
Non-fading Output
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
Display
"SRS WOW"
"FLAT"
"User Preset"
"ROCK"
"POPS"
"EASY"
"TOP40"
"JAZZ"
— 12 —
When it's ON, "Non Fader ON" is displayed.
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3
Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.
Audio Control
1
Select the source for adjustment
Press the [SRC] button.
Button
Display
[2]
"OFF"
[3]
"5/4inch"
[4]
"6*9/6inch"
[5]
"O.E.M."
Hide quick links:
Advertisement
Table of Contents
