Switching The Standby Display; Font Color Select - Kenwood KDC-X869 Instruction Manual

Switching the Standby Display

Switching the information displayed in Standby.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
The setting of this function is available while "Display Type A" is
selected for the Display mode.
2
Enter display control mode
Press the [3] ("DISP") button.
3
Enter text select mode
Press the [3] ("TEXT") button.
4
Switch the display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
KDC-X969
Information
Standby display & Clock
Standby display
Date & Clock
KDC-X869/MP922
Information
Date & Clock
Standby display
KDC-X869/MP922: While "Display Type C" is selected for the Display
mode the date is only displayed.
5
Exit Display Control mode
Press the [RTN] button.

Font Color Select

Selecting the display font color.
1
2
3
4
Display
"ALL OFF" & "CLOCK"
"ALL OFF"
"DATE" & "CLOCK"
Display
"DATE" & "CLOCK"
"ALL OFF"
— 23 —
Function of the KDC-X869/KDC-MP922
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
Enter display control mode
Press the [3] ("DISP") button.
Switch the Font color
Press the [4] ("CLR") button.
Repeatedly press the button, nine kinds of Font colors are shown
in turn.
Exit display control mode
Press the [RTN] button.