Table of Contents
Advertisement
Hold Error:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer exceeds 60°C
(140°F), stopping all
Cool down the unit by opening the windows or turning on
the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME:
Attempted to display DNPS during the CD play having no disc
names preset.
Waiting:
Radio text data is being received.
Text for the Sirius tuner source is being received.
Load:
Discs are being exchanged in the Disc
Reading:
The unit is reading the data on the
NO ACCESS:
After setting it in the Disc Changer, DNPP was done without
having it been played at least 1
IN (Blink):
The CD player section is not operating
Reinsert the CD. If the CD cannot be ejected or the display
continues to flash even when the CD has been properly
reinserted, please switch off the power and consult your
nearest service center.
Unsupported File:
A MP3/WMA is played with a format that this unit can't
support.E63
----
Protected File:
A copy-protected file is
----
Can't Download/ Download Error:
This unit does not work properly for some
Press the reset button to download it again. If this error is
still displayed, consult a local Kenwood dealer.
operation.E0d
changer.E57-1
disc.E57-2
time.E58
properly.E59
played.E64
reason.E65
No Display File:
No file that can be downloaded is contained in the CD-
ROM.E66
Make sure that a files created with referring to
<http://www.kenwoodusa.com/register/oel_software.jsp>
is contained in the CD-ROM.
Do not delete the extension (.kbm/.KBM) created when
the file was created.
Picture downloading was performed with the <CD Read
Setting> (page 45) set to "CD READ:2".
Change the setting to "CD READ:1".
Incorrect File:
The file selected to be downloaded has a format that this unit
cannot
read.E67
Recreate the file.
Writing Error:
Writing failed while the file was
Try the downloading again
— 57 —
downloaded.E68
.
Hide quick links:
Advertisement
Table of Contents
