Tuning Mode; Tuning - Kenwood KDC-X869 Instruction Manual

Kenwood cd receiver instruction manual
Hide thumbs Also See for KDC-X869:
Table of Contents

Advertisement

Tuner features

Tuning Mode

Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode
Display
Auto seek
"Auto1"
Preset station
"Auto2"
seek
Manual
"Manual"

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Entering the frequency and tuning.
Operation
Automatic search for
a station.
Search in order of the
stations in the Preset
memory.
Normal manual tuning
control.
Canceling Direct Access Tuning
Putting the station in the memory.
— 28 —
Direct Access Tuning (Function of remote)
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press the [DIRECT] button on the remote.
Station Preset Memory
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above
the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System> (page 8).
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-mp922Kdc-x969

Table of Contents