General Operation; Audio Control; Adjusting The Detail Of Audio Control - Kenwood KDC-MP338 Instruction Manual

General Operation
Audio Control
You can adjust following Audio Control items;
Function of KDC-X492/KDC-MP40BU
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leva!.
Subwooferlevel "SUB-Wt' -15-+15
Bass Boost** "B.BOOSH' "Ll"
/"L2"
I"OFF" (The
indicator turns on according to
the setting.)
System
a
"NATURAt'/ Natural/User setting/Rock/
"USER"I"ROCK"j Pops/EasylTop 40/Jazz
"POPS"I"EASY"/ (The indicator turns on
"TOP40"/"JAZZ" according to the setting.)
Bass
a
Factor
Bass Extend
Middle level
"BASS
0"
"BASS EXT"
Bass level "BASS t' -8 - +8
Middle level "MID t' -8 - +8
Treble level "TRE I" -8 - +8
Balance "BALANCE" Left 15 - Right 15
Fader "FADER" Rear 15 - Front 15
Exit Audio Control mode (Volume control mode)
*Function of KDC-X492/KDC-MP438U/KDC-MP408U.
**Function of KDC-MP338.
Q
~
• "USER": The customized Bass, Middle, and Treble levels
are effective. On the KDC-X492/KDC-MP438U/KDC-
MP408U, this item can be selected at any time. On the
KDC-MP338, this item is displayed only when the tone
quality has been adjusted. On the KDC-MP338, this item
disappears when another setting is selected.
• You can set Bass, Middle, and Treble for each source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the Control knob.
3
Select the Audio item to adjust
Press the Control knob.
4
Adjust the Audio item
Turn the Control knob.
S
Exit Audio Control mode
Press any button.
Press a button other than the Control knob or ...
button.
- -
Middle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHz
Middle
a
Factor "MID 0"
1.012.0
Treble level
- _...
,..,.
Treble Center Frequency "mE F" 10.0112.5/15.0/17.5 kHz
1
Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 6).
2
Enter Detail adjustment mode of Audio
Control
Press the Control knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the Control knob.
4
Adjust the Detail Audio item
Turn the Control knob.
S
Exit the Detail Audio Control mode
Press the Control knob for at least 1 second.
~
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for Control knob or
~
button.
6
I
KDC-X492/KDC-MP438U/KDC-MP408U1KDC-MP338