Table of Contents
Advertisement
VIA!VALET100EM
E L A N H O M E S Y S T E M S
Be careful not to make sharp bends when installing coax. F-to-RCA
connectors will be necessary to adapt the RCA composite output
of the video source (or switcher) to the F-connector of the coax run.
The VIA!Valet100EM has F-connectors on both the VIDEO IN Input
and VIDEO OUT Output.
Video Termination Switch
When the video signal coming into a VIA! Touch panel is to be
looped back out of the panel to another VIA! or TV, an F connec-
tor (VIDEO OUT) is provided. The Video Termination Switch must be
moved from the factory default to the OPEN (HiZ) position.
75 OHM
Termination
Switch
Figure 3-2: Video Termination Switch
Page 14
© ELAN Home Systems 2008 • All rights reserved.
Advertisement
Table of Contents
