Eneo DLR-2104 Quick User Manual page 53

iOS-based mobile devices
1. Run the App Store
2. Enter RAS Mobile I in the search field of the App Store application.
3. Install the RAS Mobile I program and run the program.
4. Tap the button and enter the DVR information to register the DVR.
V1.0
 Description: Enter the DVR name to use in the RAS Mobile program.
 Use DVRNS: If the DVR uses the DVRNS function, enable the Use DVRNS option.
You can set up the information for the DVRNS server by tapping the Settings button
in the default menu.
 Address, Watch Port, Search Port: Enter the IP address and port number of the DVR.
If the DVR uses the DVRNS function, check that the Use DVRNS option is enabled
and enter the DVR name registered on the DVRNS server instead of the IP address.
The name you enter should match the name set during the DVRNS setup on the DVR.

User ID, Password: Enter the user ID and password. The user ID and password you
enter should match the user ID and password used to log on to the DVR.
application in the device.
 General: Enter the DVR name to use in the RAS
Mobile I program.
 Connection Info: Enter the IP address and port
number of the DVR. If the DVR uses the DVRNS
function, enable the DVRNS option and enter the
DVR name registered on the DVRNS server instead
of the IP address. The name you enter should match
the name set during the DVRNS setup on the DVR.

Login Info: Enter the user ID and password set on
the DVR. The user ID and password you enter should
match the user ID and password used to log on to
the DVR.
23