Operation; Live Monitoring - Eneo DLR-2104 Quick User Manual

Operation

Live Monitoring

While in the live monitoring mode, pressing the
the right edge of the screen. Pressing the
and items by pressing the arrow buttons.
Login/Logout Selecting
the password to log into the system. Selecting
to confirm whether or not you want to log out the current user.
Display Selecting
 Full Screen: Selecting
 PIP, 2x2, 1+5, 1+7, 3x3: Selecting
 Camera/Status OSD: Selecting Camera OSD or Status OSD toggles Camera
Previous/Next
Selecting
Group
Freeze Selecting
Alarm Selecting
Panic Selecting
recording.
Sequence Selecting
the Sequence mode.
MENU
accesses the Login screen, and you will be asked to select a User and enter
displays the Display Menu.
camera full screen.
the selected multiview screen mode.
OSD or Status OSD On and Off.
or moves to the previous or next page.
will freeze the current image on the screen until you select
resets the DVR's outputs including the internal buzzer during an alarm.
starts panic recording of all cameras, and selecting
causes the cameras to display sequentially, and selecting
button displays the following Live Monitoring menu on
MENU
button again hides the menu. You can navigate through menus
and choosing the camera number button displays the selected
, ,
Login/Logout
Display
Previous Group
Next Group
Freeze
Alarm
Panic
Sequence
Camera Menu
Search
Setup
Status
displays the Logout screen asking you
, or displays the cameras in
again stops panic
again.
again exits
17