Eneo DLR-2104 Quick User Manual page 49

Display Selecting
 Full Screen: Selecting
 2x2, 1+5, 1+7, 3x3: Selecting
 Camera/Status OSD: Selecting Camera OSD or Status OSD toggles Camera
Previous/Next
Selecting
Group
Alarm Selecting
Panic Selecting
recording.
Camera Menu Selecting
 Zoom: Selecting Zoom and choosing the camera number zooms the current playback
 Show/Hide Text-In: Selecting Show Text-In or Hide Text-In shows or hides the
 Edit Group: Selecting Edit Group enters to the Active Cameo mode.
Export Selecting
 A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting point of the video to
 Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip copy
 Print: Selecting Print allows you to print a selected image.
Status Selecting
Data Source Selecting
Exit Selecting
displays the Display Menu.
camera full screen.
multiview screen mode.
OSD or Status OSD On and Off.
or moves to the previous or next page.
resets the DVR's outputs including the internal buzzer during an alarm.
starts panic recording of all cameras, and selecting
displays the Camera Menu.
image of the selected camera on the screen.
text-in data on the screen if the video was recorded with text-in data.
displays the Export menu.
be clip copied, and the
A–B Clip-Copy again will set the ending point of the video to be clip copied and
displays the Clip-Copy screen.
setup.
will allow you to check the status of the DVR's system, inputs and storage.
allows you to select the data source to be searched.
exits the search mode and enters the live monitoring mode.
and choosing the camera number button displays the selected
, , or
icon displays at the bottom-left corner of the screen. Selecting
displays the cameras in the selected
again stops panic
19