ZyAIR B-4000 Hot Spot Gateway
2.6.1 The Reset Button
The reset button is located on the left side panel. Use a pointed object to press this button in once to reset
the ZyAIR back to the factory defaults.
All of your custom configuration including the local subscriber database will be
erased.
Figure 2-5 Side Panel
2.6.2 Web Configurator
To reset the ZyAIR back to the factory defaults, click the SYSTEM TOOLS tab and Default Settings to
display the screen as shown next.
Figure 2-6 Default Settings
The following table describes the labels in this screen.
2-6
The Web Configurator