The following table describes the labels in this screen.
LABEL
Syslog
Syslog Server
Syslog on LAN
Server IP Address
Server MAC Address
Syslog on WAN
Server 1 IP Address
Server 2 IP Address
Log Settings
Syslog Name
Description
Interval Time
Apply
Syslog
Table 9-1 Syslog Configuration
Select Enable to activate the syslog function.
Select Disable to de-activate the syslog function.
Select this check box to specify a syslog server on the LAN.
Enter the IP address (in dotted decimal notation) of the syslog server on the LAN.
Enter the MAC address of the syslog server on the LAN.
Select this check box to specify a syslog server on the WAN.
Enter the IP address of the first syslog server on the WAN in dotted decimal
notation.
Enter the IP address of the second syslog server on the WAN in dotted decimal
notation.
This field displays the name (or type) of the syslog. Select the check box(es) to
send the syslog.
This field displays a short description about the syslog.
This field displays when or how often the ZyAIR sends the syslog. If available,
enter the number of minutes the ZyAIR waits between sending the syslog.
Click Apply to save the settings.
ZyAIR B-4000 Hot Spot Gateway
DESCRIPTION
9-3