Table 3-1 System - ZyXEL Communications ZyAIR B-4000 User Manual

ZyAIR B-4000 Hot Spot Gateway
LABEL
System Name
Domain Name
Date/Time
Secure administrator
IP addresses
Multicast Pass
Through
Allow remote user to
ping the device
SSL Certificate
Apply
3-2

Table 3-1 System

Enter a descriptive name (up to 40 characters) for identification purposes.
Enter the domain name (if you know it) here. If you leave this field blank, the
ZyAIR may obtain a domain name from a DHCP server.
The domain name entered by you is given priority over the DHCP server assigned
domain name.
Set the system date and time by selecting the appropriate choices from the drop-
down list boxes.
Click Get from my Computer to set the time and date on the ZyAIR to be the
same as the management computer.
Select Any to use any computer to access the web configurator on the ZyAIR.
Select Specify and then enter the IP address(es) or ranges of IP addresses of the
computer(s) that are allowed to log in to configure the ZyAIR.
Select Enable to allow multicast traffic to pass through the ZyAIR. This may affect
your network performance.
Select Disable to prevent any multicast traffic from passing through the ZyAIR.
This is the default setting.
Select Enable to respond to Ping requests.
Select Disable to not respond to Ping requests.
Secure Socket Layer (SSL) security allows you to create a secure connection
between the ZyAIR and the client computer(s).
Select Default to use the default system-generated SSL certificate.
Select Customer Certificate to use a certificate obtained from a certificate
authority.
Refer to the SSL (Secure Socket Layer) Security chapter for more information.
Click Apply to save the changes.
DESCRIPTION
The Web Configurator