Aastra 6735i Release Notes page 35

Configuring the Play A Ring Splash Setting Using the Aastra Web UI
Use the following procedure in the Aastra Web UI to configure the Play a Ring Splash
setting:
1. Click on Basic Settings ->Preferences ->Directed Call Pickup Settings
2. Using the Play a Ring Splash drop-down menu, select the preferred setting. Options include:
• Disabled
• Enabled
• Enabled also in call
3. Click Save Settings to save your changes.
Note:
This global setting is not dynamic. Changes to this setting will take effect only after the
phone has been rebooted.
Enabling/Disabling BLF In-Call Ring Splash Support Using the Configuration Files
Use the following parameter to enable/disable the ring tone via speaker during active calls
feature:
Parameter –
play a ring splash
Description
Format
Default Value
Range
Example
RN-001037-03 REV19 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the playing of a short ring splash when there is an
incoming call on a BLF-monitored extension.
Boolean
0 (Disabled)
0 - 2
0 (Disabled)
1 (Enabled for idle state only)
2 (Enabled for idle state and active call state)
Notes:
• This global parameter is not dynamic. Changes to this parameter
will take effect only after the phone has been rebooted.
• Playing a BLF ring splash while in an active call state (i.e. defining the
parameter as "2") is only available to the 6735i, 6737i, 6865i, and
6867i IP phones.
play a ring splash: 2
Additional Information
32