Aastra 6735i Release Notes page 13

Configuring the Preferred Line Feature Using the Aastra Web UI
Use the following procedure in the Aastra Web UI to configure the preferred line fea-
ture on the IP phone:
1. Click on Basic Settings > Preferences > General.
2. In the Preferred Line field, select a preferred line to switch focus to after incoming or out-
going calls end on the phone. Default is 1. Valid values are:
• None (disables the preferred line feature)
• 1 through 9.
For example, if you set the preferred line to 2, when a call (incoming or outgoing) ends on
the phone (on any line), the phone switches focus back to Line 2.
3. In the Preferred Line Timeout field, enter the desired amount of time (in seconds) that the
phone will switch back to the preferred line after a call (incoming or outgoing) ends on the
phone, or after a duration of inactivity on an active line. Default is 0. Valid values are 0 to 999
4. Click Save Settings.
RN-001037-03 REV19 – 07.2014
Additional Information
10