System Connections - Kenwood CT/KXF-W Instruction Manual

System connections

Make connections as shown below. When connecting the
related system components, refer also to the instruction
6
manuals of the related components.
Caution: Do not plug in the power lead until all connections
are completed.
Except for U.S.A., Canada
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greater
than, shown below.
Left and right panels: 10 cm, rear panel: 10 cm
PHONO
L
R
Audio cord
SYSTEM
CONTROL
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
REC PLAY
L
R
LINEIN LINEOUT
Audio cords
CD TUNER TAPE MD
REC PLAY REC PLAY
LINE OUTPUT
VARIABLE
L
SL16 XS 8
R
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to "In case of difficulty".
SYSTEM CONTROL
System control cord
SYSTEM CONTROL
SL 16
L
R
System control cord
*The connected component model is
variable dependent on areas.
CD player
CT-2050/203/KXF-W6010/W4010 (En/M)
AC110- AC220-
120V~ 240V~
To wall AC outlet
XS 8
Amplifier
∞