Listening To Cassette Tapes; Normal Playback - Kenwood Ct/Kxf-W Instruction Manual

Listening to cassette tapes

Preparation
Make "Playback (recording) preparation".

Normal playback

Start playback
Press the play (2 or 3) key.
To play side B.
÷ Tapes are played in the directions indicated by their respective
indicators on the display.
To pause playback (CT-203/KXF-W4010; Deck B only)
CT-2050/KXF-W6010
CT-203/KXF-W4010
÷ The 8 indicator lights.
Usage of counter
Before starting recording (playback), press the RESET A or
RESET B key to reset the counter to "0000", and write down the
counter reading when the recording (playback) should be stopped in
the middle of the tape, etc.; this will make it easy to locate the same
position when you want to continue recording (playback) next time.
It is also possible to use the Zero-stop function to return to the
position where recording (playback) was started.
RESET A
Display example.
0
To play side A.
2 7 3
8
PAUSE
Deck A counter.
To use the headphones
Connect commercially-available stereo headphones to the PHONES
jack for private listening.
PHONES
Fast forwarding or rewinding tape
1
Stop playback.
2
Press the 1 key or ¡ key.
1: Fast tape winding in the |
direction.
¡: Fast tape winding in the \
direction.
÷ Press the stop (7) key to stop fast tape winding.
To stop playback
÷ Do not press the eject (0) button until the tape has stopped
completely.
Zero-stop operation
Fast winding in the \ direction
Fast winding in the | direction
÷ Tape is wound until counter reading near "0000" where it stops.
CT-2050/203/KXF-W6010/W4010 (En/M)
2 7 3
1 ¡
2 7 3
Press simultaneously.
1 ¡
7
Press simultaneously.
1 ¡
7
11