Rewind & Play Operation; Single-Tune Repeated Playback Operation; Dash & Play Operation - Kenwood CT/KXF-W Instruction Manual

Rewind & Play operation
This operation cannot be performed with the remote control (of the separately sold amplifier).
Direction of tape direction indicator: 3.
2
Direction of tape direction indicator: 2.
2

Single-tune repeated playback operation

1
Play the tune to be repeated.
2
Press the play key of the same direction
as the current tape transport direction.
When direction of tape direction indica-
tor is 3:
Dash & Play operation
The Dash & Play skips long non-recorded spaces automatically as the tape is played.
This operation cannot be performed with the remote control (of the separately sold amplifier).
1
Determine the playback mode (conditions).
2
Press the 1 and ¡ keys simultaneously.
Press simultaneously.
1 ¡
7 3
Press simultaneously.
1 ¡
7 3
Press simultaneously.
2 7 3
REV.MODE
1 ¡
÷ Tape returns to the beginning of the tape side being played and
playback restarts from there.
÷ Press the stop (7) key to stop playback and cancel this operation.
÷ Normal playback resumes after repeating the same tune for 16 times.
÷ Press the stop (7) key to stop playback and cancel this operation.
Each press switches the indication.
1 "[" : Two sides are played only once, after which playback
stops.
2 """: Two sides are repeated 8 times, after which playback
stops.
3 """: One side is repeated 8 times, after which playback
stops.
÷ In case the REV.MODE key is set to "[" and tapes are inserted in both
of the decks, when a deck finishes Dash & Play, the other deck starts
Dash & Play for 16 times, after which it stops.
÷ Press the stop (7) key to stop playback and cancel this operation.
Convenient music search (DPSS)
CT-2050/203/KXF-W6010/W4010 (En/M)
15