Table of Contents
Advertisement
3.4 How to install
(1) How to install
There are two types of controllers; screw mount type and DIN rail mount type.
The followings are the descriptions on how to install each type:
[1] Screw mount type (LEC-GPR1)
(Installation with two M4 screws)
Screw direction
Screw direction
(2) Installation location
Please install this gateway unit at an appropriate place where the surrounding temperature will
o
not exceed 40
C.
Install the gateway unit on a flat surface. Excessive pressure applied to the housing will damage the
gateway unit.
[2] DIN rail mount type (LEC-GPR1D)
(Installation with the DIN rail)
A
Hook the controller on the DIN rail and
press the lever of section A in the arrow
direction to lock it.
Caution
- 15 -
DIN rail is locked.
DIN rail
Advertisement
Table of Contents
