ADT Network Camera User Manual page 47

⑧ Event Search: Click
for event log entries using specific conditions and play back the images associated with
those event entries.
⑨ Setup: Click
the display speed by changing the image drawing mode, and select OSD information
to be displayed on the screen.
⑩ Save Video: Click
⑪ Save Image: Click
⑫ Print: Click
⑬ Reload: Click
⑭ Timetable: Displays recorded data of the camera by time (in hour segments). If the
camera's time and date have been reset to a time that is earlier than some recorded video
and more than one video segment exists in the same time range, select the video segment
you want to search from the SEGMENT menu at the top-right corner on the timetable.
⑮ Screen Popup Menu: Clicking the right mouse button on the screen displays the screen
popup menu.
NOTE: A camera name change in the Web Search mode does not affect the camera name
set up on the camera. Leaving the Camera Title blank causes the camera name set up
on the camera to display.
to enter the event search mode which allows you to search
to set up the image drawing mode and OSD display. You can adjust
to save any video clip of recorded data as a video file.
to save the current image in a bitmap or JPEG file format.
to print the current image on a printer connected to your computer.
to reload the recording data.
− Change Camera Title: Select to change the camera title.
− Enable Audio: Plays audio while playing back recorded video
that has recorded audio.
− Aspect Ratio: Changes the image aspect ratio.
− Anti-Aliasing Screen: Select to enhance image display quality
by eliminating stair stepping (aliasing) effects in the enlarged image.
Network Camera
41