Webcasting - ADT Network Camera User Manual

User's Manual
 Resolution: Set the resolution of images for streaming. The resolution of the secondary
stream cannot exceed that of the primary stream.
 Quality: Set up the quality of images for streaming.
 Frame Rate: Set the frame rate of images for streaming. The frame rate of the secondary
stream cannot exceed that of the primary stream, and the frame rates supported for the
secondary stream change depending on the frame rate of the primary stream.
NOTE: Simultaneous connections to the camera might cause the frame rate to decrease
due to the network bandwidth overload.

Webcasting

The camera can stream live video from the camera to a website. Copy the HTML Code
displayed on the screen and paste it in your web page code.
NOTE: To use the webcasting service, you must check the Allow Anonymous Login option
during 3.2 System – User/Group setup.
22