ADT Network Camera User Manual page 45

⑪ Event Status Window: The event status window at the bottom displays a list of events
that were detected in the camera.
Motion Detection
⑫ Screen Popup Menu: Clicking the right mouse button on the screen displays the screen
popup menu.
− Aspect Ratio: Select to change the image aspect ratio displayed on the screen and the
option menu appears. Selecting Fit to Screen displays images by fitting them to the screen
size. Selecting Original Ratio displays images by fitting them to the screen size while
maintaining their original ratio. Selecting Half Size (x0.5) to Quadruple Size (x4) displays
the images at the selected image size.
− Multistream: Select to choose the desired stream if the camera is in dual stream mode.
− Anti-Aliasing Screen: Select to enhance image display quality by eliminating stair stepping
(aliasing) effects in the enlarged image.
NOTES:
 The image adjustment for the monitoring screen works only in the pause mode.
 A camera name change in the Web Watch mode does not affect the camera name set
up on the camera. Leaving the Camera Title blank causes the camera name set up
on the camera to display.
 Aspect Ratio – Half Size (x0.5) to Aspect Ratio to Quadruple Size (x4) in the Screen
Popup Menu will be enabled when the selected camera screen can display images
in those sizes.
Video Blind
− Change Camera Title: Select to change the camera title.
− Enable Audio: Select to enable audio communication with the
site which the camera is installed and the audio control
panel appears. Click the
the camera is installed and speak into the microphone. Click the
button to monitor live audio from the site which the camera is
installed through the attached speaker. Clicking both the
buttons allows two-way communication. Clicking the
disables audio communication.
Audio Detection
button to send audio to the site which
Network Camera
and
button
39