Table of Contents
Advertisement
Chapter 1 Installing Operating System
5.3
Installing Network Monitor
Using Network Monitor helps you investigate and manage network troubles.
(OS of Windows Server 2012 or later does not support network monitor.)
(1) Setting up Network Monitor
1. Download Network Monitor from the following Microsoft web page:
http://support.microsoft.com/kb/933741/en-us
2. Run the downloaded file to start the installer.
Follow the onscreen instructions to install Network Monitor.
Network Monitor installation is now complete.
(2) Capturing network traces
Described below are procedures to capture network traces by Microsoft Network Monitor 3.4. The procedures
might be changed according to specification change in the future.
1. Select Microsoft Network Monitor from the Start menu to start Network Monitor.
2. On the Start Page tab, click Create a new capture tab... . Or, select New from the File menu, and then
click Capture....
A new tab for capturing network traces is created.
3. Click Capture Settings on menu to open Capture Settings dialog.
On the Select network adapters to capture: pane, select the network whose traces are to be captured.
4. Select Start from the Capture menu to start capturing the network traces.
5. Select Stop from the Capture menu to stop capturing the network traces.
6. Select Save As... from the File menu.
The Save As dialog box appears. Select All captured frames from Frame selection, and then enter the
folder and file names.
7. Click Save.
The network trace file is created in the folder specified in Step 6.
The setup for capturing network traces is now complete.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
196
Windows Server 2008 R2 does not provide Network Monitor.
Tips
To capture network traces on Windows Server 2008 R2, Microsoft Network Monitor must
be installed using the procedure described below.
If the Security Alert message appears, click Run.
Tips
In the setup format selection window, select Complete.
To uninstall Network Monitor, use Programs and Features.
Tips
The default folder is as follows:
Tips
C:\Users\<User name>\Documents\Network Monitor 3\Captures
5. Setup for Solving Problems
Advertisement
Table of Contents
