Chapter 1 Installing Operating System
20. When ft Server Setup list appears, confirm the list items.
Provide setup for the item which is unchecked.
Install Options (LAN, SAS, Fibre Channel Board)
If you have an option board that is not yet installed, install it according to Chapter 2 (5.7 PCI Card) in
Maintenance Guide.
Update Software
See Chapter 1 (4.8.1 Applying ft Server Control Software Update Module).
Apply Windows Service Pack
See Chapter 1 (4.7 Applying Service Pack).
Service Pack 1 is applied if you use the OS install media containing Service Pack 1.
Configure duplex LAN
See Chapter 1 (4.9 Duplex LAN Configuration).
Configure dual Disk
See Chapter 1 (4.10 Configuring Duplexed Disks).
Create Volume
See Chapter 1 (4.11 Creating Volume).
Change setting of SNMP service for NEC ESMPRO Agent
As described in Chapter 2 (1.1 NEC ESMPRO Agent (for Windows), setup SNMP service by referring to
NEC ESMPRO Agent Installation Guide (Windows).
Enable OS Boot Monitoring
See Chapter 1 (4.13 Enabling OS Boot Monitoring Feature).
Setup for Solving Problems
See Chapter 1 (5. Setup for Solving Problems).
Back up System Information
See Chapter 1 (7. Backing Up System Information).
Setup with EXPRESSBUILDER is now complete.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
If necessary, perform license authentication procedure according to Chapter 1 (4.14
Tips
License Authentication).
4. Setting Up Windows Server 2008 R2
129