Table of Contents
Advertisement
Chapter 1 Installing Operating System
12. Disable probe function when the team configured with only two adapters.
– Select the Advanced tab in the Properties window. Select Probes from the Settings list box.
– Click Properties and uncheck to Send Probes.
– Click OK.
The Probe setting is not displayed when Switch Fault Torelance (SFT) feature is specified. Go to Step
13.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
Note
When Probe is enabled in an environment where the team is configured with two adapters,
if either of adapters fails, the other (healthy) adapter may be recognized as failed. If the
team is configured with four adapters, you do not need to disable Probe.
4. Setting Up Windows Server 2008 R2
161
Advertisement
Table of Contents
