Installing A Network Monitor - NEC Bull NovaScale R620 Series Setup Manual

Installing a Network Monitor

A network monitor is useful for examining the causes of network failures and taking the countermeasures. To use th
network monitor, you need to restart the system after the installation. It is recommended to install the network monitor
before a failure occurs.
1.
From the [Start] menu, selec
The [Add/Remove Windows Programs] dialog box appear
2.
Click [Add/Remove Windows Components].
The [Windows Components Wizard] dialog
3. Select the [Management and Monitoring To
window. [Management and Monitoring To
4 . Check the [Network Monitor Tools] check box on the [Subcomponents of
box and click [OK] at the bottom of the window.
5.
Click [Next].
6.
If a message is displayed asking you to insert "Windows Server 2003 R2 Enterprise Edition CD-ROM," follow
the instructions on the screen.
Close the menu that appears by inserting the CD-ROM. To close the menu, click the [X] mark on the menu.
7. Click the [X] mark on the [Add or Remove Programs] dialog box.
You can also activate the network monitor by clicking [Start], pointing to [All Programs], pointing to [Administrative
Tools] then clicking [Network Monitor]. For details on the operation, see the online help.
NovaScale R620-LR / R620-MR Setup Guide
t [Control Panel] and click [Add/Remove Windows Programs].
box appears.
ols] [Components] and click [Details...] at the bottom right of the
ols] appears.
4-32
s.
Management Monitoring Tools] dialog
e