Table of Contents
Advertisement
Chapter 2 Installing Bundled Software
(e) Saving a Configuration File
The Active Upgrade Console automatically prompts you to save your configuration file if you leave the
Configuration section of the application, or exit the application.
To save the configuration file, click Yes,
Otherwise click No or Cancel.
You can also optionally click Save or Save As on the Upgrade Summary page, as described in the following
procedure.
To save the current configuration file
1. Click Upgrade Summary in the navigation bar.
2. On the Upgrade Summary page, do one of the following:
–
Click Save to save the configuration file with the name and path name you previously specified.
Your file is saved.
–
Click Save As to save the configuration file with a new file name or path name. Continue to step
3.
3. In the Save Configuration File dialog box, specify a name for the new file. When you save the file,
a .Config extension is automatically appended to the file name.
4. Select the directory in which to save the configuration file, and save the file.
(2)
System IP Configuration on the Upgrade Side
Assign an IP address for Upgrade side of the system in split mode.
1. Open Network Settings page.
Verify the configuration by checking the dual LAN configuration, status and the allocated IP address that
appear on Network Settings screen.
2. In Upgrade-side IP address field in Network Settings page, enter the IP address for the Upgrade Side.
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
234
•
Team adapter name or network adapter name may not be displayed
Important
appropriately in Name field of Network Settings screen. This has no effect on the
Active Upgrade's operation.
•
Available IP address for the Upgrade side system is as follows:
–
IP address that belongs to the same network address as the one allocated to the
duplexed LAN.
–
An unused IP address.
1. Bundled Software for the Server
Advertisement
Table of Contents
