Rf Meter; External Speaker - Cobra GR 29 LTD ST Operating Instructions Manual

29 GR-English.qx 6/22/99 9:15 AM
Operation

RF Meter

RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
The
1
S/RF position.
22
Page 22
S/RF-SWR-CAL switch must be in the

External Speaker

The external speaker jack is used for remote
receiver monitoring.
1 Connect an external speaker to the external
speaker jack on the rear panel.
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4 watts.
When the external speaker is
plugged in,the internal speaker
is automatically disconnected.
Note
Cobra external speakers are
rated at 10 watts. See accessory
page 35.
23