Operation
RF Meter
RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
1
The
S/RF-SWR-CAL switch must be in the
S/RF position.
22
External Speaker
The external speaker jack is used for remote
receiver monitoring.
1
Connect an external speaker to the external
speaker jack on the rear panel.
23
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4.0
watts. When the external
speaker is plugged in, the
internal speaker is
automatically disconnected.
Note
Cobra external speakers are
rated at 10 watts.