29 GR-English.qx
6/22/99 9:15 AM
Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna,or
with a poorly-matched
antenna, can cause damage to
the transmitter.
Select desired
1
channel up/down on mic.
Setting Dynamike
Setting
Dynamike
This controls the microphone sensitivity
(outgoing audio level).
1
Initially, set fully
mum voice volume is available. Dynamike
may have to be reduced in some conditions.
20
Page 20
channel on display of
clockwise so that maxi-
Transmit
Push and hold microphone button to transmit.
1
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
Operation
Transmit
21