Nb-Anl/Anl/Off; Noise Limiter Switch); Rf Gain Control - Cobra GR 29 LTD ST Operating Instructions Manual

29 GR-English.qx 6/22/99 9:15 AM
Operation
NB-ANL/ANL/ NB-ANL/ANL/OFF (Noise
Blanker/Automatic Noise Limiter) Switch
OFF (Noise
Blanker /
Automatic
Noise Limiter)
Switch
Note
The RF noise blanker is very
1 When switched to ANL the Automatic Noise
effective in reducing repetitive
Limiter is activated. This helps reduce noise
noises such as ignition interfer-
created by the vehicle's electronics.
ence.
When switched to NB/ANL position the RF
Noise Blanker is also activated, providing
increased noise filtration.
When switched to OFF position all noise
filtration will be turned off.
16
Page 16
Dimmer Control
1 Ro t a te the Dimmer knob cloc kwise for maxi-
mum bri g ht n e s s ;a nt i c l oc kwise for minimum.

RF Gain Control

The RF Gain is used to optimize reception in
strong or weak signal areas.
1 Rotate the RF Gain knob anticlockwise to
reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
Operation
Dimmer Control
Note
The Dimmer controls the
brightness of the front panel,
signal strength meter and
channel display.
RF Gain Control
Note
The RF Gain is used to optimiz e
reception in weak signal areas.
17