For the best performance and op mal results, the ﬁlter assembly must be cleaned regularly.
For this reason, it is a good idea to remove larger food remnants trapped inside the ﬁlter
a er each wash cycle by rinsing the ﬁlter assembly under running water. To clean the coarse
ﬁlter and the ﬁne ﬁlter, use a so cleaning brush. Reassemble the ﬁlter parts as shown in
the diagram and reinsert the en re assembly into the dishwasher by posi oning the ﬁlter
into its seat and pressing downward.
To remove the ﬁlter assembly, grab the handle of
the ﬁne ﬁlter, rotate it counter clockwise, and then
pull the ﬁlter in an upward direc on.
Step 1: Rotate the ﬁne ﬁlter counter clockwise.
Step 2: Li ﬁne ﬁlter up.
Step 3: Li main ﬁlter up.
NOTE: Reverse the above procedure to reinstall the ﬁlter.
Inspect and clean the ﬁlters a er every dishwashing use.
By unscrewing the coarse ﬁlter you can remove the ﬁlter system. Remove any
food remnants and clean the ﬁlters under running water.
Never run the dishwasher without the ﬁlters installed. Improper
replacement of the ﬁlters may reduce overall performance of the appliance, and
subsequently damage dishware and utensils. The en re ﬁlter system should be cleaned at
least once a week. When cleaning the ﬁlters do so carefully, otherwise ﬁlters may lose their
shape, degrading the performance and overall eﬀec veness of the dishwasher.
Filter Assembly Parts