USING THE DELAY FEATURE
The start of the dishwasher can be delayed between 1 and 24 hours, using one hour increments.
To u lize this feature:
Press "ON/OFF" bu on to "ON" posi on
Press "PROGRAM" bu on
Press "DELAY" bu on once for each hour of delay
(e.g. press bu on 3 mes to delay start by 3 hours)
To cancel the delay feature:
Press "ON/OFF" bu on to "OFF" posi on.
PAUSING THE WASH CYCLE SEQUENCE
In order to make any changes to the selected wash cycle sequence, load addi onal items, or
remove previously loaded items, the dishwasher must be put into "PAUSE" mode. The
dishwasher can be put into "PAUSE" mode at any me during the wash cycle.
To temporarily pause the washing process:
Press and hold the START/RESET bu on for approximately 3 seconds to cancel
the exis ng program mode.
Make the necessary changes to the wash cycle sequence selec on or
add/remove items from the dishwasher.
Ensure that the door is closed and the latch is fully engaged.
Press the START/RESET bu on once.
The dishwasher will immediately resume opera on using the most recently
selected wash cycle sequence.
NOTE: The dishwasher will automa cally go into PAUSE mode if the door is opened. The door must
be closed and the latch engaged for the dishwasher to resume opera on. Always use the above