With both hoses connected, make sure you can plug the power cord into a 120 volt,
grounded AC outlet, then turn the dishwasher so it is facing forward.
Red Pressure Release Bu on: This red bu on, located on the Quick Release Faucet
Adapter, is used to release the water line pressure. When you ﬁrst connect to the
water faucet, you can press the red bu on to check the water is at the desired
temperature or to use the faucet normally without removing the whole Quick
Release Faucet Adapter.
Release Bu on
This part can be unscrewed
into two parts to adjust for diﬀerent
With all the ﬁ ngs connected, open the water tap to test to make sure there are no
leaks. Connect the A/C power cord and use the dishwasher as outlined in the
When ﬁnished using the dishwasher, you need to close the water supply at the tap
and disconnect the power supply cord.
The water intake hose is now pressurized. Press the Red Pressure Release
Bu on on the Quick Release Faucet Adapter, which will depressurize the water intake hose to
easily remove without squir ng water, which can be very hot and cause scalding or personal
injury. The Quick Release Faucet Adapter should then be disconnected from the faucet and
stored for its next use.
CAUTION: Do not let children disconnect the dishwasher. Close supervision of children is
always important around the appliance.
Release Bu on
This end connects to
the sink faucet.