Running Light Bulb Replacement - Victory 8-Ball Rider's Manual

08 Maintenance.fm Page 210 Monday, May 11, 2009 2:03 PM
Maintenance

Running Light Bulb Replacement

Replace the running light bulb (innermost bulb) using the same procedure as the turn signal
bulb, but leave the wire harness attached to the bulb socket when removing the socket from
the lens.
Taillight / Brake Light / Turn Signal Bulb Replacement
1. Open the saddlebags.
Tip: (Removal of the trunk or street panel is not necessary.)
2. Remove the license plate and bracket. See page 202.
3. Working from top to bottom, lift each edge of the tail molding to release the tabs.
210