08 Maintenance.fm Page 161 Monday, May 11, 2009 2:03 PM
Maintenance
Rear Suspension Adjustment
If the VICTORY air pump and gauge are not available, use the gauge provided in the tool kit,
and a pressurized air source with a maximum line pressure of 72 PSI (496 kPa). After using
this gauge, remove it quickly to minimize leakage. Expect to lose about 4 PSI (27.6 kPa)
with each pressure check when using this gauge. Use only a dry air source, such as a system
with a water separator or air line dryer, to prevent moisture from entering the shock.
CAUTION! Air pressure increases VERY quickly when using pressurized air. Wear eye and face
protection.
161