Table of Contents
Advertisement
Your new appliance
In this section, you will find information on
the control panel
■
the operating modes
■
automatic calibration
■
Control panel
Control element
Operating mode selector
Electronic clock
Clock function button
KJ
Rotary selector
Temperature display (Basic settings)
±
Info button
Temperature selector
Buttons
i
Navigation button
X
Programme button
l
Memory button
ƒ
Start button
„
Stop button
Pop-out operating knob
The rotary, temperature and operating mode selectors can all
be popped out. Push the required operating knob to pop it in or
out.
6
Use/meaning
Switching the appliance on and off
Selects the desired operating mode
Selects the clock function (see section: Electronic clock)
Makes settings within a clock function (see section: Electronic clock)
Press briefly: calls up additional information, for example the current temperature
during the heating up phase
Press and hold: calls up the Basic settings menu (see section: Changing the Basic
settings)
Sets the temperature
Changes the settings in the Basic settings menu (see section: Changing the Basic
settings)
Switches between the different lines of the text display. The settings are saved as
you do so. If the
symbol lights up in the text display, there are further selection
M
options. Press the
navigation button to move to these.
i
Selects automatic programmes (see section: Steam)
Saves and accesses the settings (see section: Memory)
Starts the operation
Short press: stops the operation (pause)
Press and hold: ends the operation
Advertisement
Table of Contents
